A few posts below I gave a procedure on collimating your imaging camera to a Hyperstar III.  On reflection I thought that this could be considered as so much “hot air” without results to prove the procedure actually works.  So a few nights ago I fired up the Hyperstar III and ran through the collimation procedure with a nicely flattened M25C OSC CCD.  I flattened the M25C chip using the procedure described on the Starlight Xpress web site.  The results of around 45-minutes of collimation adjustments are given below, and the results speak for themselves 🙂

A larger view of the results can be seen here:

Be Sociable, Share!
Leave a Reply