Statrep for the second Canon 200mm prime lens

Posted on June 15, 2014 by Greg Parker

A lot has happened since the last post on this topic.

First off, I decided that rather than putting this lens on the mini-WASP array, I would piggy-back it on the C11 as I did originally.  Why?  Because otherwise I don’t think the poor old C11 rig in the south dome would be getting any use.  Fine.  I resurrected the old mounting board and got everything put together.  Initially I had the M25C and SXV guider for imager and guide camera, and I got some work done in the Cygnus region.  It then struck me that I might be better off using the Canon 5D MkII on the 200mm in the south dome to differentiate the work from the 200mm in the north dome.  So I set up the Canon 5D MkII for an evening’s work and then switched on the SXV guider to start guiding – it was dead 🙁  Now that is slightly annoying as it was working perfectly just a few days earlier.  Never mind, these things are sent to try us, especially in deep-sky imaging.

So as the Canon 5D MkII won’t connect to an SXV guider it was now clearly a good time to buy a stand alone Lodestar x2, which I now have installed in the south dome.  The defunct SXV guider is with Starlight Xpress for repair, so that if in the future I want to revert to the M25C and SXV guider – I can.

Final part of the story.  The Lodestar x2 doesn’t want to know about Windows XP 64-bit which I have on the main south dome computer.  Fortunately I have an earlier Windows XP 32-bit astronomy computer just sitting in the study doing nothing – so that has been re-commissioned and is now back in the south dome again, this time running the Lodestar x2.

So there are now 2 computers in the south dome, one running the Lodestar autoguider, the other running the Sky 6 and driving the C11, and also Remote View for the Canon 5D MkII.  Both computers go to a Gigabit LAN switch which then has a cable up to the study so I can control proceedings from indoors.

If we ever see a clear Moonless sky again I will be able to control both the north (mini-WASP) and south (200mm lens 5D MkII) domes from indoors and also run both systems in parallel.

Only 6 more days to go before opening up the BIG pinhole camera 🙂

 

Posted in Canon 200mm prime lens | 2 Comments

Amazing light panel for flats

Posted on June 3, 2014 by Greg Parker

A friend on one of the astronomy forums asked me if these would be any good for taking flats:

Any good?  They are utterly superb!!!!!!!!!!!!  AND they are cheap!!!!!!!!!!!!!!!!!!  AND you can get an A3 or even an A2 panel (also CHEAP) if you have a large aperture scope.

I think these guys may find they have an unknown market out there for their drawing light boxes 🙂

 

Posted in Equipment, News, Projects | 14 Comments

EPOD number 59 today

Posted on May 17, 2014 by Greg Parker

Just been told I got today’s Earth Science Picture of the Day (EPOD) http://epod.usra.edu/

Took a look, and yep, sure enough, my favourite insect – the Morpho Rhetenor butterfly which kindly provided me with the Patent design for a new type of Photonic Crystal 🙂

Thank you Jim at EPOD for continuing to publish my work.

Posted in EPOD, News | Leave a comment

Statrep for the second Canon 200mm prime lens

Posted on May 16, 2014 by Greg Parker

I am getting all the bits together to be able to put another Canon 200mm prime lens on the mini-WASP top plate.  I will use an M26C camera from the top TS80 scope and will put an eyepiece (shock-horror) into the TS80.  I haven’t actually looked through an eyepiece in years.

Goods that have arrived so far:

1)  Canon 200mm f#2.8 prime lens.

2)  Set of beefy scope rings to hold the lens and camera.

3)  Several 72mm – 52mm step-down rings to hold a 52mm IDAS filter in front of the 200mm lens.

4)  A 52mm IDAS filter.

5)  A Geoptik adapter for fitting the 200mm lens to an M26C OSC.

I am making up a pair of Aluminium mounting blocks that go between the scope rings and the top plate.  I will put two mounting holes into the scope rings to prevent twist – they only come with one tapped hole.

I am awaiting delivery of a 4th Paramount counterweight as the 3 that are already on there are right at the bottom of the counterweight shaft, i.e. I can’t put any more weight on top until I get the extra counterweight.

I am also awaiting delivery of a whole bunch of Allen bolts for the scope ring mountings.

So it’s all slowly coming together.  I will also put the Robofocus from the TS80 onto the 200mm lens and see if I can get it autofocusing (I know this is a non-trivial exercise).

As it looks like it will be clear tonight, I have put the 72mm – 52mm step-down adapter on the original 200mm lens and fitted a 52mm IDAS filter.  I set the lens to f#2.8 (i.e. wide open) and I will check yo see if there are any diffraction spikes or not.  If there are still spikes I will put an aperture in the Geoptik to cover whatever part of the lens iris is showing.

Busy, busy 🙂 🙂

 

Posted in mini-WASP Array | Leave a comment

What a clever chap!!

Posted on May 13, 2014 by Greg Parker

Sergi Verdugo is a very clever chap http://astrophoto-sv.com/index.php?p=1_78 🙂

I have been thinking today about setting up a second Canon 200mm lens on the mini-WASP array for the wide field work.  To this end I was looking for 72mm HUTECH IDAS light pollution filters (I have one of these on the Canon 200mm lens I am currently using) and was drawing a blank.  Searching for HUTECH IDAS filters I came across Sergi’s (very nice!) work and found his ingenious solution.

First let’s go to basics and what I did.  I put a 72mm LP filter on the front of the Canon 200mm lens and stopped the lens down (using its internal diaphragm) to f#4.5.  Why did I stop it down?  Two reasons: one so that the filter will work (it is not designed for f#2.8 which is the lens wide open) and secondly so that I get good quality stars across the whole APS-C size sensor.  I also get the 8 highly annoying diffraction spikes around bright stars from the diaphragm thrown in for good measure.

Here comes Sergi’s solution.  Fit a 72mm – 48mm step down adapter to the front of the Canon 200mm lens and put a 48mm IDAS filter in that.  You automatically stop down your lens to f#4 where the filter will work and you will get good star shapes.  In addition you can now work with the diaphragm wide open – so no diffraction spikes – how brilliant is that then?

I bought the 52mm IDAS filter instead of the 48mm, so I get a tiny bit more speed out of the lens, and I bought a 72mm – 52mm step-down adapter from e-Bay.  I already have a 52mm – 48mm step-down adapter, so I can put in my 48mm narrowband filters when I want to do some narrowband work – and all with no diffraction spikes.  How cool is that then?

Thank you very much Sergi, a great solution – and one that I should have come up with years ago – and didn’t.  I guess I’m getting old.

Posted in mini-WASP Array | Leave a comment

Mini-WASP array statrep May 2014

Posted on May 5, 2014 by Greg Parker

Here is the current status of the mini-WASP array as of beginning May 2014.  The latest addition is the autofocuser for the Canon 200mm prime lens fitted to the top plate.  So we have:

1)  A Megrez 80 used as a guide scope together with an SX guide camera connected to one of the M26Cs.

2)  A TS80 triplet APO with 48mm IDAS filter and an M26C OSC CCD.

3)  A second TS80 triplet APO with 48mm IDAS filter and an M26C OSC CCD.

4)  A Sky 90 with a 52mm IDAS filter, filter-wheel with H-alpha, H-beta, OIII and SII narrowband filters and an M26C OSC CCD.

5)  A Canon 200mm prime lens with a 72mm IDAS filter and an M26C OSC CCD.

Probably enough for anyone 🙂

Mini-WASP array May 2014
Posted in mini-WASP Array, News | Leave a comment

The new autofocuser for the Canon 200mm prime lens

Posted on May 4, 2014 by Greg Parker

Grabbed a couple of pics of the Tom How autofocuser this afternoon.  Follow the yellow lead from the stepper motor to the control box housing the Arduino and the stepper motor drive board.

Canon 200mm autofocuser 1
Canon 200mm autofocuser 2
Posted in mini-WASP Array | Leave a comment

New goodies from Tom How arrived today

Posted on May 1, 2014 by Greg Parker

Met up with Tom How for the first time in quite a while and he brought along the stepper motor/Arduino drive unit for auto-focusing the Canon 200mm lens.  Focusmax talks to the unit (and to Maxim DL) and it all looks the business.  Just need to have the top plate off the mini-WASP AGAIN to replace the JMI electric focuser with this stepper and I should be in business.  Yet another quality astronomical product from the Tom How factory 🙂

 

Posted in mini-WASP Array | Leave a comment

Carbon star V623 Cassiopeiae

Posted on April 30, 2014 by Greg Parker

In putting together the next book “Experimental Photography” I came across some unprocessed data from a while back.  It was Carbon star V623 Cassiopeiae or SAO23858 – a very nice Carbon star lying just below Pazmino’s cluster in the constellation Cassiopeia.

Carbon star V623 Cassiopeiae
Posted in Deep Space Objects, mini-WASP Array, News, Writing | Leave a comment

Today Spica is “bright bluish”

Posted on April 16, 2014 by Greg Parker

So today’s APOD describes Spica as bright bluish.  Well you’re slowly getting there guys, eventually you’ll cotton on.  If you check out the negativity of the B-V index you’ll find that Spica is in fact the 3rd bluest star in the entire sky after Zeta Puppis and S Monocerotis – it is actually the brightest star of all 3.  So Spica is the brightest (very) blue star up there.  Maybe you’ll get it right 3rd time around?  Have you actually even seen Spica through binoculars or a low power telescope?  You can’t have I guess as it looks like a celestial sapphire blazing away with a deep blue hue.

 

Posted in News | Leave a comment